The Store Caddy, the most popular unit in our range, is designed to fit between the front seats of Land Rovers. It provides excellent space for items needed readily to hand. It also incorporates a deep padded armrest which is finished in a good quality grey or black vinyl. The unit is manufactured in 1.2mm mild steel, powder- coated in either dark grey or black, finished with rolled edges where necessary. The design features a unique vented locking radio compartment, the lid of which, in the open position, becomes a very handy resting place for sunglasses, mobile phones, etc. You also have added security for the radio as the main compartment lid also locks the radio compartment. Our modular design allows the radio compartment to be positioned centrally or to either side permitting switches etc, to be fitted alongside. Rubber mats are fitted to all storage areas including the removable internal trinket tray. There are 2 x 30mm holes at the rear of the unit to accommodate 12v sockets for the use of ancillary equipment, when not in use, these can be closed with rubber plugs supplied. You will also find a grommeted hole between the radio compartment and main storage area, to allow the fitting of a CD auto-changer or the like. The unit has a Quality Security, drill-resistant lock with two keys. Our unit is installed with a bar that spans the seat box frame under the floor to further the security. Fitting kit and instructions are included.

Deluxe and Fully Loaded Model:
All features as above plus the added extras which include a double cup holder/storage tray, the position of which can be moved to suit your or your Land Rovers preference, side map/storage net and removable interior storage pouch. There is also a secret compartment, details of which are disclosed upon purchase only. Two stainless travel mugs, two net pockets and two 12v sockets are included in the Fully Loaded model.

Many of the following features evolved from extensive customer research.

1. 10” Wide to allow easier use of seat belts.
2. Welded mild steel construction.
3. Pierced to allow choice of 4 fitting positions.
4. Powder-coated finish to durable service Leatherette Texture in Dark Grey or Black Other colour available – set-up cost extra.
5. Security anti-pry mechanism.
6. Vent holes in radio compartment to assist radio cooling.
7. Radio compartment will also house a CB.
8. Unique insulation pad to substantially reduce heat transfer from gearbox into Store Caddy.
9. The deep padded armrest allows a comfortable height for most users and is also available covered in a tasteful cloth on the Deluxe and Fully Loaded Models at no extra cost.
10. All units start out as the Basic model and can be upgraded at anytime depending on accessories chosen.
11. Rubber cushion strip fitted to lids.
12. Stainless steel wire stay on lid can be fitted to either side, drilled and tapped to suit.
13. All drilled and tapped for two nets pockets, none supplied on Basic, one on Deluxe and two on Fully Loaded.
14. On each unit there are two plugged holes at rear to take 12 volt sockets, sockets supplied only on Fully Loaded.
15. Cup holder can be separated from trinket tray by removing plastic plugs.
16. Secret compartment on Deluxe and Fully Loaded models only. Information is only disclosed upon purchase.
17. Removable wallet on Deluxe and Fully Loaded models.
18. Two stainless mugs supplied on Fully Loaded.
19 . Battery/fuel isolator can be installed inside the locked unit for extra security.